Oxidised Regenerated Cellulose (ORC) Haemostats

Key Facts

WILLOCELL haemostats comprises Sterile Absorbable Oxidised Regenerated Cellulose of plant origin and are available in 3 different forms:

 

- Standard Knitted form


- Non-woven Layered or Fibril form and a 


- Denser Knitted form.


These devices are made from cellulose derived from wood pulp which is first made into viscose/rayon fibres, then regenerated back into oxidised cellulose hence the term ORC.


On application haemostasis is typically achieved within 1 to 3 minutes.


If left in situ following haemostasis the device is fully absorbed withing 7 to 14 days.


WILLOCELL is classified as being clinically, technically and biologically equivalent to the brand leading ORC devices. 


The key differentiating factor between WILLOCELL and the leading brand is that WILLOCELL is available for a fraction of the cost.


WILLOCELL haemostats are Class III medical devices and certified compliant to the requirements of the EU Medical Device Directives by Notified Body 2292.


This ORC product has been available since 2012 and over 4 million units have been supplied across a range of surgical disciplines without reported events or incidents.


Manufacturer: Will-Pharma BV, Netherlands.

Anser Medical Ltd's Status: Distributor.


Lexicon: Cellulose Haemostats, Mechanical Haemostats, Passive Haemostats, Haemostatic Dressings, Hemostats.

Intended Use

Used adjunctively in surgical procedures to assist in the control of capillary, venous and small arterial haemorrhage when ligation or other conventional methods of control are impractical or ineffective. 


Willocell can be cut to size for use in endoscopic procedures.


To access the Instruction for Use (IFU) pdf document click the button labelled Willocell IFU Datasheet.

Willocell IFU Datasheet

Contraindication

Do not use as packing or wadding unless it is to be removed after haemostasis has been achieved.


Do not use for implantation in bone defects such as fractures since there is a possibility of interference with callus formation and a theoretical chance of cyst formation.


When used to help achieve haemostasis in, around or in proximity to formania in bone, areas of bony confines, the spinal  cord or the optic nerve and chiasm, it must always be removed after haemostasis is achieved since it may swell and could exert unwanted pressure.



To access the Instruction for Use (IFU) pdf document click the button labelled Willocell IFU Datasheet.

Willocell IFU Datasheet

ISO9001:2015 Requirement

Click on the green button below to provide feedback on our products and services.

The good, the not so good and the bad!

Customer Feedback

Medical Device Regulation Requirement

For reportable incidences with these medical devices click on the red button below to notify ourselves and the manufacture Will-Pharma.

Report Incident to Manufacture

Sterile Absorbable ORC is available in the following forms and sizes:

Standard Form

Available sizes:

  1. 25020NL-12 Sterile Absorbable ORC, 100x200 mm, 12 units/box.
  2. 25019NL-12  Sterile Absorbable ORC, 50x350 mm, 12 units/box.
  3. 25018NL-12 Sterile Absorbable ORC, 50x75 mm, 12 units/box.
  4. 25016NL-12  Sterile Absorbable ORC, 50x12.5mm, 12 units/box.

Layered or Fibril Form

Available sizes:

  1. 25030NL-10 Sterile Absorbable ORC Fibril, 26x51 mm, 10 units/box.
  2. 25031NL-10 Sterile Absorbable ORC Fibril, 51x102 mm, 10 units/box.
  3. 25032NL-10 Sterile  Absorbable ORC Fibril, 102x102 mm, 10 units/box.


Denser Knit Form

Available sizes:

  1. 25021NL-10 Sterile Absorbable ORC Fibril, 26x26mm, 10 units/box.
  2. 25022NL-12 Sterile Absorbable ORC Fibril, 76x102 mm, 12 units/box.
  3. 25023NL-10 Sterile Absorbable ORC Fibril, 150x220 mm, 10 units/box.

How to purchase

These products can be purchased direct from our online catalogue which can be accessed by clicking here to register your details, once these have been submitted the catalogue will open.


These products are also available from the following NHS online catalogues:



  • Edge4Health online Catalogue.

Product Training & Education Zone


The Product Training and Education Zone on our website provides resouces for organisations who are either customers of Anser Medical Ltd or have agreed to evaluate our product range prior to instigating switching to our brand.   


The resource includes product presentations and training videos, technical documentation and evaluation forms.   


This is a password protected area, for access contact Anser Medical Ltd.


Share by: